Laserliner MultiWet-Master Operations Instructions download pdf (Page 20)

1 sec

–

7.5.

Index mode is used to rapidly locate moisture with comparative

measurements, without a direct output of material moisture in %.

The output value (0 through 1000) is an indexed value that increases

as material moisture becomes greater. Measurements made in index

mode are independent of material type and particularly useful with

materials for which no characteristics are stored. When comparative

measurements reveal strongly deviating values, the course of

moisture in the material can be localized quickly.

The wet/dry LED indicator is programmed in line with the relevant material characteristics so the LEDs also

provide information about whether the material should be classiÖ ed as dry, moist or wet.

However the values in index mode, which is independent of the material type, are output on a neutral scale

whose value increases as the moisture level rises. The LED indicator can be speciÖ cally programmed for index

mode by deÖ ning the end values for “dry” and “wet”. The difference between the value set for “dry” and

that set for “wet” is converted and displayed by the 12 LEDs.

Setting the wet/dry threshold values in index mode

Index mode

Index mode can be used in both resistance measurement as

well as in capacitive measurement. See Step 6 and 10 for setting

index mode.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 267 268

No comments

Laserliner MultiWet-Master Operations Instructions Page 20